Glad to hear the Predator sales are growing. I found your tool to be very effective and efficient in most all of the wells it was installed. It improved the pump fill and sometimes it even increased the production. It makes the tool economically and operationally justifiable. Take care and hope sales continue to increase.

These (2) wells have the new 60’ Predator X-6 Separators. The ‘xx09’ was installed about 40 days ago and a Request has been made to speed up the SPM. “First time in our history“. The x02 has been in the hole for about 15 days and run time is climbing 2-4 points per day as the fluid level comes down.

The ‘X12345’ had a Predator Gas Separator installed about 2 weeks ago during a routine tubing leak repair. The pump card shown below taken this morning shows that the pump fill is between 90 to 95%! The XYZ gas separator was only providing 70% pump fill on this well with 1000 psi of pump intake pressure and the production appears to have increased from about 23 BOPD to 42 BOPD and the gas is way up from 150 to 475 MCFPD. This may be a flumping or surging well that the Predator is handling very well. The fluid level has been pulled down from 2700’ to about 1900’ of fluid above the pump and the well has quit cycling as much, so the unit is able to pump more fluid every day. The Predator gas separator is working GREAT!